Characterization of the solvation environment provided by dilute aqueous solutions of novel siloxane polysoaps using the fluorescence probe pyrene

Solubilization environment afforded by several of the novel allyl glycidyl ether-modified methylhydrosiloxane polymers are investigated using a common polycyclic aromatic hydrocarbon fluorescence probe, pyrene. The backbone of the polymer has been modified by the addition of an alkyl chain of varying length (either C8, C12, or C18) and to differing degrees of substitution. The nomenclature adopted for the purposes of these studies is as follows: "AGENT" represents the backbone polymer with no alkyl substitution, and "OAGENT", "DAGENT", and "SAGENT" are substituted with n-octyl, n-dodecyl, and n-octadecyl, respectively. The percentage of alkyl substitution is designated as 10, 15, and 20%. The pyrene polarity scale (defined as the ratio of the intensity of peak I to peak III) was used to determine the relative dipolarity of the cybotactic region provided by approximately 1 w/w% aqueous polymer solutions compared to 10 mM sodium dodecylsulfate (SDS) micellar solution. Results indicate that 10-15% DAGENT afforded the most hydrophobic solubilization site, followed by 15% OAGENT and 15% SAGENT. In addition, as the degree of alkyl substitution of DAGENT increased from 10 to 20%, the cybotactic region appeared to become more hydrophobic. Furthermore, a deeper investigation into the relative size of the solubilization site revealed that all alkyl-substituted polymers promoted excimer formation at relatively low pyrene concentrations, indicating the possibility of localized concentration enhancement within the solvation pockets and/or compartmentalization of the solute molecules. The pyrene fluorescence excitation data strongly indicates ground-state heterogeneity that is most prominent in AGENT and decreases as the alkyl chain length is increased. This provides a relative sense of the size and shape of the solvation pockets afforded by each polymer solution. An overall analysis of the collected data indicated that these alkyl-substituted polymers may provide a more selective and efficient pseudostationary phase in electrokinetic chromatography with better solvation capacity for hydrophobic compounds compared to SDS.     

Correlation between the fluorescent response of microfluidity probes and the water content and viscosity of ionic liquid and water mixtures

Accurate data on transport properties such as viscosity are essential in plant and process design involving ionic liquids. In this study, we determined the absolute viscosity of the ionic liquid + water system at water mole fractions from 0 to 0.25 for three 1-alkyl-3-methylimidazolium ionic liquids: 1-butyl-3-methylimidazolium hexafluorophosphate, 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide and 1-ethyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide. In each case, the excimer to monomer ratio for 1,m-bis(1-pyrenyl)alkanes (m= 3 or 10) was found to increase linearly with the mole fraction of water. Of the probes studied only PRODAN and rhodamine 6G, both of which have the ability to participate in hydrogen bonding, exhibited Perrin hydrodynamic behavior in the lower viscosity bis(trifluoromethane sulfonyl)imides. As a result, these probes allow for the extrapolation of the absolute viscosity of the ionic liquid mixture from the experimental fluorescence steady-state polarization values.     

Thermodynamic properties of quinoxaline-1,4-dioxide derivatives: a combined experimental and computational study

The mean (N-O) bond dissociation enthalpies were derived for three 2-methyl-3-(R)-quinoxaline 1,4-dioxide (1) derivatives, with R = methyl (1a), ethoxycarbonyl (1b), and benzyl (1c). The standard molar enthalpies of formation in the gaseous state at T = 298.15 K for the three 1 derivatives were determined from the enthalpies of combustion of the crystalline solids and their enthalpies of sublimation. In parallel, accurate density functional theory-based calculations were carried out in order to estimate the gas-phase enthalpies of formation for the corresponding quinoxaline derivatives. Also, theoretical calculations were used to obtain the first and second N-O dissociation enthalpies. These dissociation enthalpies are in excellent agreement with the experimental results herewith reported.     

An investigation of the properties of poly(dimethylsiloxane)-bioinspired silica hybrids

Elastomers typically require the incorporation of reinforcing fillers in order to improve their mechanical properties. For commercial silicone systems silica and titania are typically used as fillers. Fumed and precipitated silica are made on an industrial scale for many applications; however, we have shown recently that biological and synthetic macromolecules can generate new silica structures using a bioinspired route. Herein we have incorporated bioinspired silica fillers into poly(dimethylsiloxane) (PDMS) elastomers and investigated their mechanical, morphological and thermal properties as a function of filler loading. The equilibrium stress-strain characteristics of the PDMS-bioinspired silica hybrids were determined as a function of bioinspired filler loading and the Mooney-Rivlin constants (2C₁ and 2C₂) were calculated. The thermal characteristics, in particular glass transition temperatures (T_g) and melting points (T_m), of the PDMS-bioinspired silica hybrids were characterized using differential scanning calorimetry (DSC). The thermal stability of these hybrid materials were investigated using thermogravimetric analysis (TGA). The morphology of the samples was characterized using scanning electron microscopy (SEM), and the filler dispersion was characterized using ultra small angle X-ray scattering (USAXS) and scanning electron microscopy (SEM). Although spherical silica particles were used here, we have demonstrated elsewhere that this bioinspired synthetic route also enables highly asymmetric silica structures to be prepared such as fibres and sheets. This methodology therefore offers the interesting possibility of preparing new hybrid systems where the properties are highly anisotropic.     

Characterization of framework and extra-framework aluminum species in non-hydrated zeolites Y by 27Al spin-echo, high-speed MAS, and MQMAS NMR spectroscopy at B0 = 9.4 to 17.6 T

27Al spin-echo, high-speed MAS (nu(rot) = 30 kHz), and MQMAS NMR spectroscopy in magnetic fields of B0 = 9.4, 14.1, and 17.6 T were applied for the study of aluminum species at framework and extra-framework positions in non-hydrated zeolites Y. Non-hydrated gamma-Al2O3 and non-hydrated aluminum-exchanged zeolite Y (Al,Na-Y) and zeolite H,Na-Y were utilized as reference materials. The solid-state 27Al NMR spectra of steamed zeolite deH,Na-Y/81.5 were found to consist of four signals. The broad low-field signal is caused by a superposition of the signals of framework aluminum atoms in the vicinity of bridging hydroxyl protons and framework aluminum atoms compensated in their negative charge by aluminum cations (delta(iso) = 70 +/- 10 ppm, C(QCC) = 15.0 +/- 1.0 MHz). The second signal is due to a superposition of the signals of framework aluminum atoms compensated by sodium cations and tetrahedrally coordinated aluminum atoms in neutral extra-framework aluminum oxide clusters (delta(iso) = 65 +/- 5 ppm, C(QCC) = 8.0 +/- 0.5 MHz). The residual two signals were attributed to aluminum cations (delta(iso) = 35 +/- 5 ppm, C(QCC) = 7.5 +/- 0.5 MHz) and octahedrally coordinated aluminum atoms in neutral extra-framework aluminum oxide clusters (delta(iso) = 10 +/- 5 ppm, C(QCC) = 5.0 +/- 0.5 MHz). By chemical analysis and evaluating the relative solid-state 27Al NMR intensities of the different signals of aluminum species occurring in zeolite deH,Na-Y/81.5 in the non-hydrated state, the aluminum distribution in this material was determined.     

Trifluoroethanol and liquid-assisted grinding method: a green catalytic access for multicomponent synthesis

Research on Chemical Intermediates - An efficient and versatile mechanochemical route for the synthesis of chromene and isoindolo[2,1-a]quinazoline scaffolds has been developed via a simple mortar...     

Bioinspired synthesis of new silica structures

Silicon and oxygen are the two most abundant elements in the Earth's crust but despite the vast scientific literature on crystalline and amorphous silica, new chemistries, structures and applications continue to be discovered for compounds formed from these elements--thus we present here for the first time the formation of new amorphous silica structures that were uniquely synthesized by a bioinspired synthetic system.     

Energetic and structural characterization of 2‐R‐3‐methylquinoxaline‐1,4‐dioxides (R = benzoyl or tert‐butoxycarbonyl): experimental and computational studies

The gaseous standard molar enthalpies of formation of two 2‐R‐3‐methylquinoxaline‐1,4‐dioxides (R = benzoyl or tert‐butoxycarbonyl), at T = 298.15 K, were derived using the values for the enthalpies of formation of the compounds in the condensed phase, measured by static bomb combustion calorimetry, and for the enthalpies of sublimation, measured by Knudsen effusion, using a quartz crystal oscillator. The three dimensional structure of 2‐tert‐butoxycarbonyl‐3‐methylquinoxaline‐1,4‐dioxide has been obtained by X‐ray crystallography showing that the two N? O bond lengths in this compound are identical. The experimentally determined geometry in the crystal is similar to that obtained in the gas‐phase after computations performed at the B3LYP/6‐311 + G(2d,2p) level of theory. The experimental and computational results reported allow to extend the discussion about the influence of the molecular structure on the dissociation enthalpy of the N? O bonds for quinoxaline 1,4‐dioxide derivatives. As found previously, similar N? O bond lengths in quinoxaline‐1,4‐dioxide compounds are not linked with N? O bonds having the same strength. Copyright © 2007 John Wiley & Sons, Ltd.